Home › ›Civil Engineering Quiz — Set 3 (75 MCQs with Answers)

Civil Engineering Quiz — Set 3 (75 MCQs with Answers)

Paper / Post details

TitleCivil Engineering Quiz — Set 3 (75 MCQs with Answers)
Published
Sourceppscpastpapers.blogspot.com — solved with explained answers

Set 3 of 4 in the Civil Engineering subject series — 75 solved MCQs from the solved civil-engineering databank: fluid mechanics, hydrology, irrigation, sewers and environmental engineering basics asked in sub-engineer and lecturer tests, every answer verified against its source key. Questions stay in the same shuffled order for your whole sitting, and a new visit brings a fresh order. You have 75 minutes. If you leave in the middle, your picked answers are saved in your own browser so you can continue where you left off. Tap one option per question, then press Check Answers for your score.

📚 All Civil Engineering sets live on the Civil Engineering MCQs subject page — finish this set, then move to the next one there.

💪 شاباش! تم صحیح جگہ پر ہو

یہ سوالات PakMcqs کے حل شدہ سوالیہ بینک سے لیے گئے ہیں؛ ہر سوال کا جواب اس کی اپنی key کے علاوہ ایک آزاد قابلِ جانچ حقیقت سے بھی تصدیق شدہ ہے۔

یہ مکمل کر کے Civil Engineering MCQs subject page، اور ساتھ میں Civil Engineering Set 4 بھی ضرور کرو — اس طرح تمہاری تیاری کا بڑا حصہ مکمل ہو جائے گا۔ ہمت رکھو، کامیابی قریب ہے!

Specific weight of water in S.I. units is equal to_________________?

Correct answer: 9.81 xlO3 N/m3.

Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called________________?

Correct answer: adhesion.

Mercury does not wet glass. This is due to property of liquid known as_________________?

Correct answer: surface tension.

The value of mass density in kgsecVm4 for water at 0°C is_______________?

Correct answer: 101.9.

Liquids________________?

Correct answer: none of the above.

If no resistance is encountered by displacement, such a substance is known as___________________?

Correct answer: ideal fluid.

Practical fluids____________________?

Correct answer: possess all the above properties.

Fluid is a substance that_______________?

Correct answer: cannot remain at rest under action of any shear force.

A fluid is said to be ideal, if it is________________?

Correct answer: inviscous and incompressible.

The volumetric change of the fluid caused by a resistance is known as_________________?

Correct answer: compressibility.

An ideal flow of any fluid must fulfill the following______________?

Correct answer: Continuity equation.

Fluid is a substance which offers no resistance to change of_________________?

Correct answer: shape.

A piece of metal of specific gravity 13.6 is placed in mercury of specific gravity 13.6, what fraction of it volume is under mercury ?

Correct answer: whole of the metal piece will be immersed with its top surface just at mercury level.

The buoyancy depends on__________________?

Correct answer: mass of liquid displaced.

The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be____________________?

Correct answer: 2000 kg.

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be_________________?

Correct answer: lower than the surface of liquid.

Falling drops of water become spheres due to the property of ________________?

Correct answer: surface tension.

Free surface of a liquid tends to contract to the smallest possible area due to force of _________________?

Correct answer: surface tension.

Specific weight of sea water is more that of pure water because it contains ________________?

Correct answer: all of the above.

Alcohol is used in manometers because_____________________?

Correct answer: it can provide longer column due to low density.

Which of the following is the unit of kinematic viscosity _________________?

Correct answer: stoke.

The ratio of absolute viscosity to mass density is known as____________________?

Correct answer: kinematic viscosity.

The property of fluid by virtue of which it offers resistance to shear is called____________________?

Correct answer: viscosity.

Alcohol is used in manometer, because___________________?

Correct answer: its vapour pressure is low.

For manometer, a better liquid combination is one having______________?

Correct answer: higher surface tension.

Choose the correct relationship_________________?

Correct answer: dynamicviscosity = kinematicviscosity x density.

Units of surface tension are_________________?

Correct answer: both of the above.

A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm2 and a volume of 0.039 m3 at 150 kg/cm2. The bulk modulus of elasticity of liquid is _________________?

Correct answer: 4000 kg/cm2.

Surface tension _____________________?

Correct answer: acts in the plane of the interface normal to any line in the surface.

The value of the coefficient of compressibility for water at ordinary pressure and temperature in kg/cm is equal to _________________?

Correct answer: 21,000..

The bulk modulus of elasticity __________________?

Correct answer: increases with pressure.

Viscosity of water in comparison to mercury is ______________________?

Correct answer: higher.

For very great pressures, viscosity of moss gases and liquids __________________?

Correct answer: shows erratic behaviour.

The surface tension of mercury at normal temperature compared to that of water is____________________?

Correct answer: more.

An object having 10 kg mass weighs 9.81kg on a spring balance. The value of ‘g’ at this place is___________________?

Correct answer: 10m/sec2.

The normal stress in a fluid will be constant in all directions at a point only if_________________?

Correct answer: it is at rest..

When the flow parameters at any given instant remain same at every point, then flow is said to be____________________?

Correct answer: uniform.

The specific weight of water is 1000 kg/m” _______________?

Correct answer: all the above.

The property of a fluid which enables it to resist tensile stress is known as________________?

Correct answer: cohesion.

Property of a fluid by which its own molecules are attracted is called ________________?

Correct answer: cohesion.

Pick up the incorrect statement from the following?

Correct answer: The gases produced in sludge digestion process, contain 75% carbon dioxide.

Pick up the incorrect statement from the following?

Correct answer: The old convergence system was definitely better than water carried sewerage system.

Pick up the correct statement from the following?

Correct answer: All the above.

Pick up the correct statement from the following?

Correct answer: All the above.

Pick up the correct statement from the following?

Correct answer: All the above.

Pick up the correct statement from the following?

Correct answer: all of these.

Pick up the correct statement from the following?

Correct answer: All the above.

Pick up the correct statement from the following?

Correct answer: All the above.

Pick up the correct statement from the following ?

Correct answer: All the above.

The gas which may cause explosion in sewers, is_________________?

Correct answer: Methane.

The discharge per unit plan area of a sedimentation tank, is generally called________________?

Correct answer: All the above.

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is____________________?

Correct answer: 2 hours.

Pick up the incorrect statement from the following for allowing workers to enter sewers_______________?

Correct answer: The men entering the manhole should be advised to smoke in the sewer.

To prevent settling down of sewage both at the bottom and on the sides of a large sewer, self-cleaning velocity recommended for Indian conditions, is_________________?

Correct answer: 0.75 m/sec.

The normal values of over flow rates for sedimentation tanks using coagulant, ranges between__________________?

Correct answer: 50,000 to 60,000 litres/sqm/day.

At the junction of sewers___________________?

Correct answer: None of these.

Sewer pipes are designed for maximum discharge with 25% to 33% vacant cross-sectional area for__________________?

Correct answer: All of the above.

The sewer that unloads the sewage at the point of treatment is called_________________?

Correct answer: Outfall sewer.

For a grit chamber, if the recommended velocity of flow is 0.2 m/sec and detention period is 2 minutes, the length of the tank, is__________________?

Correct answer: 24 m.

If the depth of flow in a circular sewer is 1/4th of its diameter D, the wetted perimeter is______________?

Correct answer: /3.

If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains_______________?

Correct answer: Carbon dioxide.

If the diameter of a sewer is 150 mm, the gradient required for generating self cleansing velocity, is________________?

Correct answer: 1 in 100.

The grit and silt of the grit chambers, may not be used for_________________?

Correct answer: Concreting.

Imhoff cone is used to measure________________?

Correct answer: Settleable solids.

Dilution method of disposing of sewage, is not preferred to_______________?

Correct answer: When diluting water is used for water supply near the point of sewage disposed.

The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is_________________?

Correct answer: 1 in 100 downward.

For the COD test of sewage, organic matter is oxidised by K2Cr2O7 in the presence of________________?

Correct answer: H2SO4.

In sewers the velocity of flow should not be_________________?

Correct answer: Less than the self-cleansing velocity.

In sewers the effect of scouring is more on__________________?

Correct answer: Bottom side.

Sewer ventilating columns are generally placed at_______________?

Correct answer: All the above.

In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is____________________?

Correct answer: Q/(B × L).

The most efficient cross-section of sewers in a combined sewerage system is________________?

Correct answer: Circular.

The factor responsible for purification of sewage in river is________________?

Correct answer: All the above.

To maintain aerobic biological activity, the moisture content of the compost mass should be about_________________?

Correct answer: 55 %.

The pH value of sewage is determined with the help of_________________?

Correct answer: Potentiometer.

Finished this set? 📚 All Civil Engineering sets · 🧠 Quiz Hub — all subjects & services · ▶ Next: Civil Engineering Set 4

🔔 نئی جابز اور کوئز سب سے پہلے پائیں

Get every new job advertisement, quiz set and free book the day it is published. Subscribe kar lein — koi naya account nahi banana, bas apne Google account se Follow dabayein.

✅ Subscribe / Follow
Free forever · Latest jobs · New MCQs sets · Free PDF books
ADVERTISEMENTAdSense in-post slot — paste unit code here
← NEWER POST

Comments ()

💬 Post a comment